Guide

How to build cabinets

Build kitchen cabinets in order: fix the sizes, make a cut list, cut and join the box, then frame, drawers and doors. Real part sizes, with links to each step.

Build a cabinet in this order: fix the sizes and the sheet thickness, make the cut list, cut the sheets, join the box, add the back, then the frame, shelves, drawers and doors. A kitchen cabinet box is a carcass: two sides, a bottom, a top or stretchers, a back and shelves. The box comes first and everything else fits to it.

For a 24 wide, 34 1/2 high, 24 deep face frame base the box is 8 pieces, the sides are 34 1/2 by 23 1/4, and the whole cabinet is 20 pieces with the frame, drawer and door. The sections below link to the detailed guide for each stage.

What is in a cabinet box

A carcass (the UK word for the box) is made of sheet panels. In a base cabinet the parts are two sides, a bottom, two stretchers across the top, a back, a shelf and a toe kick board. A wall cabinet swaps the stretchers for a full top and drops the toe kick. A face frame cabinet adds solid wood stiles and rails on the front. Everything is sized from the width, height and depth, and from the real thickness of your plywood.

Every part of the 24 inch face frame base with the product defaults. Lengths run with the grain.
PartQtyLengthWidthRule
Side234 1/223 1/4C-5, C-6
Bottom122 9/1623C-8, C-9, C-10
Stretcher222 9/164C-11
Back, 1/4123 5/1630C-12
Shelf122 7/1622 3/4C-14
Toe kick board1244 1/2C-16
Frame stile21 1/230F-2
Frame rail (top)1211 1/2F-3, F-4
Frame rail (middle)1211 1/2F-3, F-4
Frame rail (bottom)1211 1/2F-3, F-4
Drawer front (drawer 1)1226D-4
Drawer side (drawer 1)2224 1/4B-4, B-5, B-7
Drawer front/back (drawer 1)2194 1/4B-3, B-7
Drawer bottom, 1/4 (drawer 1)119 1/221 1/2B-8
Door (door 2)12221 1/2D-1
Every part of the 24 inch face frame base with the product defaults. Lengths run with the grain.
The base cabinet pulled apart. The box is the sides, bottom, stretchers, back and shelf; the frame, drawer and door sit on it.

Fix the sizes

Start with what the room needs: width, height and depth of each cabinet. The tool's starting sizes for a base are 34 1/2 high and 24 deep, and for a wall cabinet 12 deep. These are defaults, and sources differ, so look at standard kitchen cabinet dimensions and change anything you need. The toe kick, 4 1/2 high by 3 deep, comes out of the height. The choices are in toe kick styles.

Measure the sheet and choose the joinery

Measure the plywood you bought. The tool assumes 23/32 panels and a 1/4 back, because a sheet sold as 3/4 inch is usually a little less. Then choose a back method (rabbet or applied) and a joint (butt or dado). A butt joint is quickest, a dado locates the panel and resists racking, and either is a valid choice. The numbers move with each choice, as shown in how to build a base cabinet box. Choose a frame or frameless style at this point too: the two lists compared shows the difference in parts.

Make the cut list

The cut list turns three sizes into parts. The interior width is the cabinet width less two panel thicknesses, 22 9/16 here. The bottom is that long, the back is 23 5/16 wide with a rabbet, and the shelf is 22 7/16 by 22 3/4. You can do the sums by hand: how to make a cut list derives every part with its formula. A spreadsheet works for one cabinet, and cut list in Excel or a tool says where it stops being enough. For a whole room, the kitchen cabinet cut list collects every cabinet.

Count and lay out the sheets

Group the parts by material and thickness, then lay them on 4 by 8 sheets. This one cabinet takes 1 sheet of the main panel material, 3 sheets of all materials in total at 77% yield on the main group. One cabinet is not a kitchen: see how many sheets of plywood for a kitchen and sheet layout and kerf for how the saw blade changes the layout. Allow for edge banding too, see edge banding allowance.

The build sequence

  1. Cut the sheet parts: sides, bottom, stretchers or top, shelves, back and toe kick. Label each and mark the front edge.
  2. Cut the toe notch on each side, 4 1/2 by 3 at the front bottom corner, and any dados or the back rabbet.
  3. Join the sides to the bottom and stretchers (or the top). Glue and screws for butt joints.
  4. Square the box by the diagonals, then fix the back. A rabbeted back helps square the box.
  5. Build the face frame and fix it to the front, see how to build a face frame.
  6. Build the drawer boxes, see how to build drawer boxes, with slide clearances in drawer box sizes.
  7. Make the doors, see how to build cabinet doors and door overlay and reveal, then fit shelves and hang the doors.

Wall cabinets follow the same order with two changes: a full top instead of stretchers, and hanging rails to fix them to the wall. The 30 wide wall cabinet in how to build upper cabinets has 13 pieces. Base cabinets have their own guide, the base cabinet box.

Questions people ask first

Is it cheaper to build cabinets than to buy them?

That depends on the material you pick, the hardware, the finish and the value of your time, so we do not give a figure. What the cut list gives you is the first number for a quote: the sheet count. Multiply the sheets by the price you are quoted for the plywood you want, then add the solid wood for frames and doors, the hardware and the finish. The sheet count for a room is in how many sheets for a kitchen.

Is it hard to build your own cabinets?

The box is not hard if you can cut sheet goods straight and square. The work that needs patience is the face frame, the drawer boxes and the doors, because they have to fit the box. A butt-jointed box with a pocket-screw frame is the simplest route. Leave the doors until the box and frame are done, because a door is sized to the finished opening.

What size should shelves be?

An adjustable shelf is narrower than the interior by 1/8 for fit and set back 1/4 from the front, so a 24 base takes a shelf 22 7/16 by 22 3/4. A fixed shelf is the full interior width.

Building more than one cabinet

Build a kitchen as batches, not as single cabinets. Cut every side from one setup, every bottom from the next, and so on, so that each saw fence setting is used once. Label parts with the cabinet name from the list. Build one cabinet completely first, with frame, drawer and door, before you cut the rest: a wrong assumption about thickness or overlay shows up in one box instead of twelve. When that cabinet fits, change the setting in the list and the rest follow. The list for a whole room is in the kitchen cabinet cut list page, and the cut list index shows the sizes for each cabinet type.

Common mistakes

  • Building from nominal thickness. 23/32 panels give an interior of 22 9/16; a 3/4 inch assumption gets it wrong by 1/16.
  • Cutting everything before you square one dry-fit box. Mistakes in the first cabinet repeat across the room.
  • Sizing doors before the box is built. Doors fit the opening, not the drawing.
  • Counting sheets from area alone. Grain and kerf cost more than area suggests.
  • Mixing the back into the main sheet count. The back is 1/4, so it is its own group.

For the wall cabinet cut list see wall cut lists, for the base see base cut lists, and all cut lists is the index.

Questions people ask

Is it cheaper to build or buy cabinets?

It depends on the material, hardware, finish and your time, so no single figure holds. Count the sheets from a cut list, multiply by the plywood price you are quoted, and add frames, doors, hardware and finish to compare it with a quote.

Is it hard to build my own cabinets?

The box is straightforward if you can cut sheet goods square. The face frame, drawer boxes and doors take more care because they have to fit the finished opening. A butt-jointed box with a pocket-screw frame is the simplest route.

What parts does a cabinet carcass have?

A base carcass has two sides, a bottom, two stretchers, a back, an adjustable shelf and a toe kick. A wall carcass has a full top instead of stretchers and no kick. A face frame cabinet also has solid wood stiles and rails on the front.

What should I cut first when building a cabinet?

Cut the sides first, because every other part is sized from them or from the interior width between them. Then cut the bottom and stretchers, then the back and shelves, and the frame and fronts last.

What joinery should I use for cabinet boxes?

Butt joints with glue and screws are the quickest and are the tool default. Dados locate the panels and resist racking. Either works, and the cut list changes with the choice, so decide before you cut.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool