Guide

How to build upper cabinets

Parts and sizes for a 30 x 30 x 12 wall cabinet, how a full top differs from a base, hanging rails behind the back, shelf and hinge counts.

A wall cabinet is a box with a full top and a full bottom, no toe kick and no stretchers. A 30 wide, 30 high, 12 deep face frame wall cabinet has sides 30 by 11 1/4, a top and bottom 28 9/16 by 11, and a 1/4 back 29 5/16 by 30.

The part that decides whether it stays on the wall is how you hang it. A thin back is not a fixing surface, so either screw through a hanging rail or add rails (rule C-13) behind the back. The numbers below come from the engine.

Every part of the wall cabinet

This cabinet has 23/32 plywood panels, two adjustable shelves and a pair of slab doors. The depth of 12 includes the 3/4 face frame, which is why the sides are 11 1/4. With the frame and doors it has 13 pieces.

Parts of a 30 x 30 x 12 face frame wall cabinet with the product defaults.
PartQtyLengthWidthRule
Side23011 1/4C-5, C-6
Bottom128 9/1611C-8, C-9, C-10
Top128 9/1611C-11
Back, 1/4129 5/1630C-12
Shelf228 7/1610 3/4C-14
Frame stile21 1/230F-2
Frame rail (top)1271 1/2F-3, F-4
Frame rail (bottom)1271 1/2F-3, F-4
Door (door 1)213 15/1628D-2
Parts of a 30 x 30 x 12 face frame wall cabinet with the product defaults.
The wall cabinet pulled apart: sides, a full top and bottom, the back in its rabbets, two shelves and the face frame.
Front elevation: a pair of doors over a two-opening frame, with no toe kick.

What differs from a base cabinet

There is no kick (rule C-2), so the sides and the back are the full 30 and the frame stiles are 30 long. Wall cabinets carry a full top the same size as the bottom (rule C-11) instead of two stretchers, which keeps the top and bottom as solid ties between the sides. The shelf is 28 7/16 by 10 3/4: narrower than the interior by the shelf gap and set back 1/4 from the front. See the base cabinet box for the joinery choices, which work the same here.

C-5, C-6

H_side x D_side = 30 x 11 1/4 (D_side = D - T_ff = 12 - 3/4 = 11 1/4)

C-8, C-9, C-10

L_h x D_h = (W_in + 2j) x (D_side - rabbet) = (28 9/16 + 0) x (11 1/4 - 1/4) = 28 9/16 x 11

C-12

Back = (W_in + 2 x d_rab) x H_box = (28 9/16 + 3/4) x 30 = 29 5/16 x 30

C-14

Shelf = (W_in - shelf_gap) x (D_h - shelf_setback) = (28 9/16 - 1/8) x (11 - 1/4) = 28 7/16 x 10 3/4

Hanging rails behind the back

A 1/4 back will not hold screws that carry a loaded cabinet. The fix is a hanging rail: a strip of the carcass plywood, 3 1/2 wide with the default setting, that runs between the sides behind the back. You screw through the rail into the wall studs. Rule C-13 gives each rail as the interior width long, 28 9/16 here, and the engine lists two when you set the count to 2.

The same wall cabinet with and without two hanging rails.
SettingRailsBack (L x W)
Defaultnone29 5/16 x 30
Two hanging rails2 at 28 9/16 x 3 1/229 5/16 x 30
The same wall cabinet with and without two hanging rails.

The back is unchanged; the rails are extra parts. Fit one near the top and one near the bottom, so the screws land in the strongest part of the box. The engine does not say how many screws or what size: that depends on the wall and the load. Do not hang on drywall alone.

Building the wall box

  1. Cut the sides, top, bottom, back, shelves and any hanging rails to the list. Wall sides are the full height, so there is no notch to cut.
  2. Cut the back rabbet or dados if you are using them. The back is 29 5/16 wide with the default rabbet and goes in from the rear.
  3. Join the sides to the top and bottom. Glue and screws work for a butt joint, as on a base box.
  4. Fit the hanging rails behind where the back will sit, then square the box and fix the back.
  5. Drill the shelf pin holes. Set them 1/4 back from the front so the shelf clears the frame.
  6. Fix the face frame (see how to build a face frame), then hang the doors on the hinges and mount the cabinet to the wall.

Hinge counts

Each door gets two hinges, plus one for each of 40, 60, 80 that the door height passes (rule H-2). The 30 cabinet has doors 28 high, so a pair takes 4 hinges. A 48 wall cabinet has doors 46 high and takes 6. Door sizes follow from the opening and the overlay, see door overlay and reveal, and how to make the doors is in how to build cabinet doors.

Frameless wall cabinets

Without a frame the sides are the full 12 deep and the doors run to the edge of the box, so the same 30 x 30 x 12 cabinet has 9 pieces instead of 13. Face frame versus frameless compares the lists for a base cabinet.

Common mistakes

  • Giving a wall cabinet a toe kick or two stretchers. It has neither: the top is a full panel.
  • Hanging a cabinet from the 1/4 back alone. Use a rail or a French cleat; the engine lists rails but the wall fixing is your job.
  • Taking the depth from a base cabinet. The wall depth is 12 here, including the frame.
  • Counting two hinges per door on a tall door. At 46 the engine lists three.
  • Cutting the back to the interior width when it sits in a rabbet. It is 3/4 wider than the interior.

More sizes are in the wall cabinet cut lists, and the sequence for the whole job is in how to build cabinets.

Questions people ask

What parts does a wall cabinet box have?

Two sides, a full top, a full bottom, a back, adjustable shelves and, for a face frame cabinet, two stiles and rails for the frame. There is no toe kick and no stretchers, because the top is a full panel.

How deep should an upper kitchen cabinet be?

The tool defaults to 12 inches including the face frame, so the sides are 11 1/4 inches deep. The depth is an input, so you can change it.

What are hanging rails on a wall cabinet?

Hanging rails, called nailers in some places, are strips of carcass plywood that run between the sides behind a thin back. You screw through them into the wall studs, because a quarter inch back will not hold a loaded cabinet.

How many shelves should a wall cabinet have?

The tool defaults to two adjustable shelves in a 30 inch high wall cabinet, and the count is an input. Each shelf is narrower than the interior by the shelf gap and set back from the front.

How many hinges does a wall cabinet door need?

Two per door, plus one for each height step of 40, 60 and 80 inches that the door passes. A door under 40 inches high gets two hinges.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool