Free. No signup. No row limits.

Drawer box calculator

Enter the opening and the depth. Get the box width, height and length, and every part size, for side-mount slides or Blum TANDEM undermount slides.

Units
Slide

Face frame: the opening between stiles. Frameless: the cabinet interior.

From the front of the opening to the back of the cabinet.

Clearances and box construction
Default from source. S2: Accuride needs at least 1/2 in (12.7 mm)
Default to confirm: assumption, no source yet
Default from source. S1 example: 1/2 in
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
  • Box outside width20B-3

    W_bx = opening - 2 x c_side = 21 - 1 = 20

  • Box height4 1/4B-4

    H_bx = opening - c_top - c_bot = 5 - 1/2 - 1/4 = 4 1/4

  • 2 x Slide length22B-5

    Longest slide that is at most D_clear - c_rear = 23 3/4 - 1 = 22 3/4: 22

  • 2 x Drawer side22 x 4 1/4B-7

    L_bx x H_bx = 22 x 4 1/4

  • 2 x Drawer front/back19 x 4 1/4B-7

    (W_bx - 2 x T_ds) x H_bx = 19 x 4 1/4

  • Drawer bottom19 1/2 x 21 1/2B-8

    (W_bx - 2 x T_ds + 2 x d_bg) x (L_bx - 2 x T_ds + 2 x d_bg) = 19 1/2 x 21 1/2

Tap a result to see its formula with your numbers. Verify against your own materials and hardware before cutting.

Build the whole cabinet

Email me this result

Optional. We send one email with a link that restores this on any device. It is not needed to use the tool.

We use your address to send this link and, only if you ticked the box, tips. See the privacy policy.

How it is calculated

Side-mount slides need clearance on each side. The box is the opening minus the clearance on both sides: W_bx = W_dop - 2 x c_side (rule B-3). Accuride states that slides may not work properly with less than 1/2 inch (12.7 mm) of side space, and that the tolerance is plus-only, so the default is 1/2 inch and the calculator warns below it.

Blum TANDEM undermount slides are sized from the inside of the box. Popular Woodworking quotes the Blum rule that the inside width is the opening minus 42 mm, so the outside width is W_bx = opening - 42 mm + 2 x T_ds (B-3). With 1/2 inch sides that is the opening minus about 21/32 inch, which the article rounds to "subtract 5/8". Blum also limits undermount side thickness to 16 mm, and the calculator refuses thicker sides. These figures are for the 563H family; check the Blum sheet for your slide.

The box height is the opening minus the clearance above and below the sides: H_bx = H_dop - c_top - c_bot (B-4). For undermount slides the sources give 1/4 inch above and 9/16 inch below, and the bottom is recessed 1/2 inch.

The slide is the longest nominal length that fits the depth less rear clearance: L_slide = max(L ≤ D_clear - c_rear) (B-5). A 24 inch slide does not fit a standard 24 inch deep base cabinet, which is why the calculator picks 21 inch for the default example.

Sides and bottom follow from those (B-7, B-8): the front and back are the box width less the two sides for a butt joint, and the bottom sits in a groove on all four sides. Everything above is a setting. Defaults marked as assumptions are ones to confirm.

Build your cabinet now

The calculators are small views of the cut list tool. Build the whole cabinet, free, no account.

Open the cut list tool