Standard kitchen cabinet dimensions
A sourced table of standard kitchen cabinet sizes: base 34 1/2 by 24, wall 12 deep, tall 84 to 96 high, toe kick, counter height and widths. Sources compared.
A standard base cabinet is 34 1/2 inches high and 24 inches deep, a standard wall cabinet is commonly 12 inches deep and 30 or 36 inches high, and a tall cabinet is 84, 90 or 96 inches high and usually 24 inches deep. Widths step in 3 inches. These are the figures the sources we read agree on, and where they disagree this page says so.
The table
| Dimension | Common figure | What the sources say |
|---|---|---|
| Base cabinet height | 34 1/2 in | Five sources agree; one gives 30 in with a 4 in toe kick |
| Base cabinet depth | 24 in | Six sources agree; 25 to 26 in overall with a countertop overhang |
| Base cabinet width | 9 to 48 in, 3 in steps | Sebring: 9 to 48; Hunker: 9 to 46; Bob Vila: 12 to 60; Best Online Cabinets: 6 to 42 |
| Toe kick | 4 1/2 in high, 3 in deep in the tool | Heights of 4 1/2, 4 and 3 1/2 in; depth 3 in where stated |
| Counter height | About 36 in finished | Bob Vila and Sebring: 35 to 36 in; Erin Zubot Design and Remodelista: 36 in |
| Counter overhang | 1 to 2 in | Bob Vila: up to 2 in; Best Online Cabinets: one to two inches |
| Wall cabinet depth | 12 in | Four sources; deeper options exist |
| Wall cabinet height | 30 and 36 in on every list of specific heights | Lists differ from 12 to 48 in |
| Gap, counter to wall cabinet | About 18 in | Range 15 to 24 in across sources |
| Tall cabinet height | 84, 90, 96 in | Three sources; Bob Vila says 7 or 8 ft |
| Tall cabinet depth | 24 in, or 12 in | Best Online Cabinets, Bob Vila, Hunker |
| Sink base width | 30 to 36 in | Single 30, double 33 or 36, per Bob Vila and Hunker |
We read seven pages on 2026-11-19, six editorial or retail pages and one forum thread (low authority). The National Kitchen & Bath Association's guideline pages returned an access error, so no figure on this site is attributed to that body, and we did not find drawer base widths stated on any page we read.
One page for each question
- Standard base cabinet height: 34 1/2 inches, counter height, toe kick.
- Standard kitchen cabinet depth: 24, 12 and why depth changes the sides.
- Standard wall and tall cabinet sizes: heights, the gap above the counter, tall cabinets.
What a standard size gives you
A size is only the start of a cut list. The same 24 inch base needs different parts as a face frame cabinet and as a frameless one. Here is each, from the tool's rules:
| Part | Qty | Length | Width | Rule |
|---|---|---|---|---|
| Side | 2 | 34 1/2 | 23 1/4 | C-5, C-6 |
| Bottom | 1 | 22 9/16 | 23 | C-8, C-9, C-10 |
| Stretcher | 2 | 22 9/16 | 4 | C-11 |
| Back, 1/4 | 1 | 23 5/16 | 30 | C-12 |
| Shelf | 1 | 22 7/16 | 22 3/4 | C-14 |
| Toe kick board | 1 | 24 | 4 1/2 | C-16 |
| Frame stile | 2 | 1 1/2 | 30 | F-2 |
| Frame rail (top) | 1 | 21 | 1 1/2 | F-3, F-4 |
| Frame rail (middle) | 1 | 21 | 1 1/2 | F-3, F-4 |
| Frame rail (bottom) | 1 | 21 | 1 1/2 | F-3, F-4 |
| Drawer front (drawer 1) | 1 | 22 | 6 | D-4 |
| Drawer side (drawer 1) | 2 | 22 | 4 1/4 | B-4, B-5, B-7 |
| Drawer front/back (drawer 1) | 2 | 19 | 4 1/4 | B-3, B-7 |
| Drawer bottom, 1/4 (drawer 1) | 1 | 19 1/2 | 21 1/2 | B-8 |
| Door (door 2) | 1 | 22 | 21 1/2 | D-1 |
| Part | Qty | Length | Width | Rule |
|---|---|---|---|---|
| Side | 2 | 30 | 24 | C-5, C-6 |
| Bottom | 1 | 22 9/16 | 23 3/4 | C-8, C-9, C-10 |
| Front stretcher | 1 | 22 9/16 | 4 | C-11 |
| Rear stretcher | 1 | 22 9/16 | 4 | C-11 |
| Back, 1/4 | 1 | 23 5/16 | 30 | C-12 |
| Shelf | 1 | 22 7/16 | 23 1/2 | C-14 |
| Toe kick board | 1 | 24 | 4 1/2 | C-16 |
| Drawer front (drawer 1) | 1 | 23 7/8 | 6 | D-10 |
| Drawer side (drawer 1) | 2 | 22 | 4 23/32 | B-4, B-5, B-7 |
| Drawer front/back (drawer 1) | 2 | 20 9/16 | 4 23/32 | B-3, B-7 |
| Drawer bottom, 1/4 (drawer 1) | 1 | 21 1/16 | 21 1/2 | B-8 |
| Door (door 2) | 1 | 23 7/8 | 23 3/4 | D-10 |
The face frame version is 20 parts, the frameless one 15. The pages for standard sizes in cut lists show this for each common width, and the kitchen cabinet cut list page puts several together.
Questions people ask
What are the standard sizes of kitchen cabinets?
Base cabinets are 34 1/2 inches high and 24 inches deep. Wall cabinets are commonly 12 inches deep and 30 or 36 inches high. Tall cabinets are 84, 90 or 96 inches high and 24 inches deep. Widths run in 3 inch steps. These are the figures the sources we read agree on.
What widths do kitchen cabinets come in?
Sebring Design Build gives 9 to 48 inches in 3 inch steps for base cabinets and Hunker 9 to 46 inches, often in 3 inch steps. Bob Vila says 12 to 60 inches and Best Online Cabinets 6 to 42 inches. The sources differ on the extremes and agree on the 3 inch step.
How wide is a sink base cabinet?
Bob Vila says single sinks usually fit 30 inch cabinets and double sinks 36 inches. Hunker says 30 inches for a single basin and 33 inches for a double or offset sink, with 36 also possible. Best Online Cabinets says 30 to 42 inches.
Are these sizes a code or a standard?
They are common sizes reported by retail and editorial pages, not a published standard. We could not read the trade body guidelines, so nothing here is attributed to one. A shop can build any size.
How do I get a cut list for a standard size?
Open the tool with the size filled in using the links on this page, or pick a size from the cut list pages for standard widths. Every part comes with its rule and formula.
Sources
- Bob Vila, Standard Kitchen Cabinet Sizes Read .
- Best Online Cabinets, Kitchen Cabinet Standard Size Guideline Read .
- Sebring Design Build, Kitchen Cabinet Sizes and Specifications Guide Read .
- Hunker, What Are the Standard Kitchen Cabinet Dimensions? Read .
- Erin Zubot Design, A Guide for Standard Kitchen Cabinet Dimensions Read .
- Remodelista, Kitchen Cabinet Measurements Read .