Cut list for kitchen cabinets
A kitchen is one list, not twelve
Start with a typical run of base, drawer base, sink and wall cabinets already loaded. Change the sizes to your kitchen and see one cut list by material and thickness, with a layout for every sheet.
Load a typical run
Four cabinets, face frame, 3/4 inch plywood. Replace them with yours.
What a kitchen list needs
One cabinet is easy to check by hand. A kitchen is dozens of cabinets, and the same part size appears in many of them. The list merges identical parts and keeps a trace back to the cabinets that use them, so you cut the sides once and know where each pair goes.
Parts are grouped by material and actual thickness. The carcass, the quarter inch backs and the drawer boxes each have their own group, because they come off different sheets. The sheet layouts then show how many sheets of each you need, with the saw kerf and grain direction respected.
Everything you see on screen is free. The clean PDF, the CSV and re-exports after edits come with the project pass. Check the first cabinet against your own method before you cut the whole job.
Build your cabinet now
Prefer to start from one cabinet? It is free, with no account.