Cut list for this size

Cut lists for standard cabinet sizes

Parts, sheets and yield for standard cabinet widths: base, wall, sink base and tall, face frame and frameless, generated by the same rules as the tool.

These pages give the parts, sheet count and yield for cabinets at the standard widths in the sources we read: base and wall cabinets in 3 inch steps from 12 to 36 inches, sink bases at 30, 33 and 36, and tall cabinets at 18, 24 and 30. Each table is generated by the same rules as the tool.

Pick a cabinet type

The most searched sizes

How these pages are built

Each page is generated, not written by hand. The engine builds the cabinet at the stated size with the default construction settings, a 23/32 inch carcass, 1/8 inch kerf, a 4 1/2 by 3 inch toe kick and side-mount slides, and the page prints what comes out. If you change any of those settings in the tool, the numbers change, and the pages show the defaults so you have a fixed place to compare from.

Where the sizes come from

Every size on these pages is stated by at least one page we read, and the dimensions reference lists each source, the read date and where sources differ. A size is not a standard because it appears here: a shop can build any size, and the tool takes any size you enter. For a whole kitchen, see the kitchen cabinet cut list page.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool