Cabinet cut list guides
Practical guides to building a cabinet cut list: box construction, face frame versus frameless, drawer boxes, door overlay, kerf and sheet counts.
These guides explain how a cabinet cut list is built, one decision at a time. Each one uses the same rules as the tool, and every worked example is produced by the engine, so the numbers on the page are the numbers the tool gives you.
Start with the box if you are new to cut lists, with fronts and drawers if the box is familiar, and with sheets if you already have a parts list and want to price the job. Each guide stands alone and links to the calculator that does the same job live.
Building the box
- How to build a base cabinet box. Build order and joinery for a base cabinet, with every part sized by rule: sides, bottom, stretchers, back, shelf and kick.
- Toe kick styles. Notched sides, a separate base or legs: what each does to the side height, the kick parts and the cross member count.
- Face frame versus frameless. The same base cabinet cut both ways, side by side, and the rules that make the two lists differ.
Fronts and drawers
- Door overlay and reveal explained. Overlay, inset and frameless doors, how each size is derived, and where the gap defaults come from.
- Five-piece door sizes. Stile, rail and panel sizes for a five-piece door, with the groove depth and the panel gap.
- Drawer box size for side-mount and undermount slides. The same opening worked for side-mount slides and Blum TANDEM undermount slides, with the clearances.
Sheets, banding and planning
- Sheet layout and saw kerf. How a cutting diagram works and how kerf and grain change the sheet count.
- How many sheets of plywood for a kitchen. Sheet counts per material from a sample kitchen run, and what moves the number.
- Edge banding allowance and cut size. Which edges are banded by default, how banding changes the cut size, and how to buy banding with a waste allowance.
- Cut list in Excel or in a tool. What a spreadsheet needs to get every formula right, where mistakes creep in, and when a spreadsheet is the better choice.
Reference and comparisons
If you want standard sizes first, the dimensions reference lists base, wall and tall sizes with sources, and the cut lists for standard sizes show the parts for each width. For a whole kitchen, see the kitchen cabinet cut list. If you are choosing software, the comparison pages set this tool beside the others, using only what each product says on its own site.