Cabinet project

Several cabinets, one consolidated list by material, sheet layouts and exports. Everything on screen is free.

Units

Switching units converts every stored length exactly. Use the settings below to load the other system's defaults.

Cabinets

  • Face frame base, 24 x 34 1/2 x 24

    Construction

    Type sizes as 34 1/2, 34-1/2 or 34.5. Height includes the toe kick. Depth is the box, including the face frame.

    Fronts, top to bottom (height is the frame opening; the last one takes what is left)
    Height

    The remainder

Construction

Consolidated cut list

20 parts across 1 cabinet, 3 sheets. Edge banding 182 with 10% allowance.

Plywood, 1/4 2 parts

Plywood 1/4
RefPartQtyLengthWidthBandedCabinets
ABack, 1/4123 5/1630-Base 24
BDrawer bottom, 1/4119 1/221 1/2-Base 24

Plywood, 1/2 4 parts

Plywood 1/2
RefPartQtyLengthWidthBandedCabinets
ADrawer side2224 1/4-Base 24
BDrawer front/back2194 1/4-Base 24

Plywood, 23/32 9 parts

Plywood 23/32
RefPartQtyLengthWidthBandedCabinets
ASide234 1/223 1/4-Base 24
BBottom122 9/1623-Base 24
CStretcher222 9/164-Base 24
DShelf122 7/1622 3/4L1Base 24
EToe kick board1244 1/2-Base 24
FDrawer front1226L1 L2 W1 W2Base 24
GDoor12221 1/2L1 L2 W1 W2Base 24

Solid wood, 3/4 (solid stock) 5 parts

Solid wood 3/4
RefPartQtyLengthWidthBandedCabinets
AFrame stile21 1/230-Base 24
BFrame rail (top) / Frame rail (middle) / Frame rail (bottom)3211 1/2-Base 24

Linear totals: 123 at 1 1/2 wide

Sheet layouts

Kerf and grain direction are respected. The layout is a heuristic: a better arrangement may exist.

Plywood 1/4: 1 sheet

Yield 24%

PLYWOOD · 1/4Back, 1/430 x 23 5/16Drawer bottom, 1/419 1/2 x 21 1/2

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Plywood 1/2: 1 sheet

Yield 8%

PLYWOOD · 1/2Drawer side 1Drawer side 2Drawer front/back 1Drawer front/back 2

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Plywood 23/32: 1 sheet

Yield 77%

PLYWOOD · 23/32Side 134 1/2 x 23 1/4Side 234 1/2 x 23 1/4Toe kick boardBottom22 9/16 x 23Shelf22 7/16 x 22 3/4Stretcher 1Stretcher 2Door21 1/2 x 22Drawer front

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Hardware and material cost

Hardware, counted by rule

Hardware list
ItemQtyRule
Hinges2H-2
Pulls or knobs2H-3
Shelf pins4H-4
Drawer slides, pair, 221H-1

Counts only, no brand catalogue. Hinge steps, pulls, pins and legs are settings; their defaults are assumptions to confirm.

Material cost estimate

Type your own prices. Nothing is priced until you do. This is an estimate of materials, not a quote.

Take it to the saw

The list and layouts above are free to view. The clean PDF, the CSV and re-exports after edits are part of a pass or the Shop plan.

  • Project Pass

    $9 once

    This project, up to 60 cabinets, every export and edit.

  • Shop, monthly

    $15 a month

    Unlimited projects, saved shop standards, branding and labels.

    Checkout opens soon.

  • Shop, annual

    $99 a year

    Unlimited projects, saved shop standards, branding and labels.

    Checkout opens soon.

30-day money back on the pass and the first Shop payment. See what each one covers.

You sign in with an email link or Google only when you buy. Your project comes back with you.

Keep this project

Settings for this project

Everything that changes a number is a setting. Defaults marked as assumptions are ones to confirm for your shop.

Your shop standard: save these settings once and apply them to every new project.

Material and carcass

Measure your sheet. Most 3/4 in plywood is 23/32 in.

Default from source. S7: 3/4 in plywood is typically 23/32 in (18 mm)
Default to confirm: assumption, no source yet
Back and joinery
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Toe kick and top
Default from source. S5: 4 1/2 in / 114 mm
Default from source. S6
Default to confirm: assumption, no source yet
Face frame
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Doors and fronts
Default from source. S4: partial overlay often 1/2 in
Default from source. S4: 1/16 gap
Default from source. S3: AWI nominal 3.2 mm
Default to confirm: assumption, no source yet
Default from source. S4 worked example: 2 1/4
Default from source. S4 worked example: 2 1/4
Default from source. S4 worked example: 3/8
Default from source. S4 worked example: 1/16
Default to confirm: assumption, no source yet
Drawers
Default from source. S2: Accuride needs at least 1/2 in (12.7 mm)
Default to confirm: assumption, no source yet
Default from source. S1 example: 1/2 in
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Sheets and saw
Default from source. S7: 4 x 8 ft retail sheet
Default from source. S7
Default from source. S8: 3.2 mm example
Default to confirm: assumption, no source yet
Edge banding
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Hardware counts

Comma separated, for example 40, 60, 80. Assumption: confirm against your hinge maker.

Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet
Default to confirm: assumption, no source yet