Free. No signup. No row limits.
Shaker door calculator: rail, stile and panel sizes
Enter the finished door size. Get the stiles, rails and panel for a five-piece shaker door, with the formula and rule ID for each, and change the stile width, groove depth and panel gap to match your cutters.
Stile, rail, groove and panel gap
2 x Stile2 1/4 x 30D-12
Stile = S_d x H_door = 2 1/4 x 30
2 x Rail11 1/4 x 2 1/4D-13
Rail = (W_door - 2 x S_d + 2 x g_d) x R_d = (15 - 4 1/2 + 3/4) x 2 1/4 = 11 1/4 x 2 1/4
Panel11 1/8 x 26 1/8D-14
Panel = (W_door - 2 x S_d + 2 x g_d - 2 x e_d) x (H_door - 2 x R_d + 2 x g_d - 2 x e_d) = 11 1/8 x 26 1/8
Groove 3/8 deep in every stile and rail edge; the panel floats 1/16 short of the groove bottom on each edge.
Tap a result to see its formula with your numbers. Verify against your own materials and hardware before cutting.
For a shaker door, each stile is the full door height, each rail is the door width minus two stile widths plus two groove depths, and the panel is the rail length minus two panel gaps wide and the door height minus both rails plus two groove depths minus two panel gaps tall. A 11 1/4 inch rail and a 11 1/8 by 26 1/8 inch panel are what a 15 by 30 inch door gives at the defaults.
The three questions in one table
| Question | Answer | Rule |
|---|---|---|
| Rail length, 15 inch door, 2 1/4 inch stiles, 3/8 inch groove | 11 1/4 in | D-13 |
| Panel, 15 by 30 inch door, 2 1/4 inch stiles and rails | 11 1/8 by 26 1/8 in | D-14 |
| Stile, 15 by 30 inch door, 2 1/4 inch stile | 2 1/4 by 30 in | D-12 |
Every number in this table is computed by the calculator's engine when the page is built. If the rules ever change, the table changes and the build fails on any sentence that is no longer true.
The formulas
Stile = S_d x H_door, two per door, grain along the height
Rail length = W_door - 2 x S_d + 2 x g_d, width R_d, two per door
Panel width = W_door - 2 x S_d + 2 x g_d - 2 x e_d; panel height = H_door - 2 x R_d + 2 x g_d - 2 x e_d
The groove depth g_d is also the stub tenon length, and the panel gap e_d is how far the panel is left short of the groove bottom on each edge so it can move. The rail-length formula follows the one on the inchcalculator.com cabinet door calculator, read 2026-11-19: door width minus the stile widths plus the groove depth at each end.
A second door, in millimetres
A 381 by 762 millimetre door with 57 millimetre stiles and rails, a 10 millimetre groove and a 1.5 millimetre panel gap gives rails 287 millimetres long and a 284 by 665 millimetre panel.
Common mistakes
- Using the rail length without adding the groove depth. The rail then sits short of the groove bottom and the door racks.
- Cutting the panel to the groove-to-groove size. It needs the panel gap on every edge or it will crack the frame in a humid month.
- Mixing the door size and the opening size. The door size comes from the overlay or reveal: see the door size calculator and the five-piece door guide.
- Forgetting the stiles are the full height. A common error is to cut them short and run the rails full width.
For doors inside a whole cabinet, the cut list tool sizes five-piece doors from the cabinet automatically when you set the door style to five-piece.
Questions people ask
How do I calculate rail and stile lengths for a shaker cabinet door?
Stiles run the full door height. Each rail is the door width minus two stile widths plus two groove depths, because the rail's ends are stub tenons that sit in the stile grooves. For a 15 inch wide door with 2 1/4 inch stiles and a 3/8 inch groove the rails are 11 1/4 inches long.
What size panel do I cut for a 15 by 30 inch shaker door?
With 2 1/4 inch stiles and rails, a 3/8 inch groove and a 1/16 inch panel gap on each edge, the panel is 11 1/8 by 26 1/8 inches. The gap lets the panel move with the seasons without pinching the frame.
How wide should shaker door rails and stiles be?
There is no standard. 2 1/4 inches is the default in this calculator, taken from the worked example on the inchcalculator.com cabinet door calculator, and it is a setting you change to match your cutters. Treat it as a convention, not a rule.
What is the groove depth and why is it in the rail length?
The groove holds the panel edge and the rail's stub tenon. The rail has to reach into the stile groove at both ends, so its length adds the groove depth twice. Change the groove depth in the settings and the rail length follows.
Sources
- inchcalculator.com, Cabinet door calculator. Source S4 of the product rules Read .
This calculator is free with no account. One whole cabinet is free too. A whole project (PDF, CSV, labels) is $9 once for one project, or Shop at $15 a month or $99 a year. Pricing.
Build your cabinet now
The calculators are small views of the cut list tool. Build the whole cabinet, free, no account.