Cabinet dimensions reference
A sourced reference for standard kitchen cabinet sizes: base height and depth, wall and tall cabinets, toe kick and counter height, each with sources and read dates.
This section lists the common sizes of kitchen cabinets, with every figure tied to a page we read, the read date, and a note where sources disagree. Each page links to the cut list for that size, so you can go from a number to the parts you cut.
How these pages are written
Each figure on these pages comes from a page we fetched on 2026-11-19. We cite the page, say which figures agree and say which do not. We did not state anything we could not find on a fetched page. The kitchen planning guidelines of the National Kitchen & Bath Association returned an access error, so no figure is attributed to that body. If you build to a different size, the tool takes any size you enter.
The pages
- Standard kitchen cabinet dimensions: one table of base, wall and tall sizes, toe kick, counter height and widths.
- Standard base cabinet height: 34 1/2 inches, counter height and toe kick.
- Standard kitchen cabinet depth: 24 inches for base, 12 for wall, and what depth does to the sides.
- Standard wall and tall cabinet sizes: heights, the gap above the counter and tall cabinets.
- Cut lists for standard sizes: the parts and sheet count for each common width, face frame and frameless.
From a size to a cut list
Dimensions are the input. The cut list is what you cut. The cabinet calculator hub links the four calculators that work from sizes, and the kitchen cabinet cut list page shows how a whole run adds up. Sources we read came from Bob Vila, Hunker and Sebring Design Build, among others listed on each page.