Guide

How many sheets of plywood does a kitchen need?

Sheets of plywood by thickness group for a six-cabinet kitchen, face frame and frameless, with what drives the count and how to estimate from part area.

The sheet count comes from the cut list, not from the kitchen's square footage. It is set by how many parts you have in each material and thickness, how big they are, which way their grain has to run, and how well the parts pack onto a 4 by 8 sheet. A sample run of 6 cabinets (two bases, a drawer base, a sink base and two wall cabinets) needs 8 sheets in total as a face frame kitchen and 8 as a frameless one, of which 5 are 23/32 plywood for the boxes and doors.

To estimate before you have a list, add up the part area in each thickness and divide by the sheet area times a yield, as shown below. The numbers on this page come from real engine runs and one sample kitchen. They are not a rule that fits your kitchen.

Sheets per material group

Sheets are counted per material and per actual thickness, because a 1/4 back never shares a sheet with a 23/32 side. The sample run at the product defaults, with 23/32 carcass and door plywood and a 1/4 back, comes out like this. The face frame style adds solid wood frame stock as well, 63.3 feet of 3/4 stock, which is bought by length, not by the sheet.

Face frame sample run: sheets by material group.
MaterialPartsPart area (sq ft)SheetsYield
Plywood 1/41145.7271%
Plywood 1/22015.8149%
Plywood 23/3252131.5582%
Face frame sample run: sheets by material group.
Frameless sample run: sheets by material group.
MaterialPartsPart area (sq ft)SheetsYield
Plywood 1/41146.8273%
Plywood 1/22019.3160%
Plywood 23/3252134.0584%
Frameless sample run: sheets by material group.
PLYWOODSide 134 1/2 x 23 1/4Side 234 1/2 x 23 1/4Side 334 1/2 x 23 1/4Side 434 1/2 x 23 1/4Bottom22 9/16 x 23Shelf22 7/16 x 22 3/4
First sheet of the 23/32 group, face frame sample run. Yield is part area over usable sheet area.

Yield is the part area divided by the sheet area used, so a group with a few parts on the last sheet has a low figure. The thin groups show it: the backs and the drawer parts fill part of one or two sheets, but you still buy the whole sheet. Frameless needs 5 sheets of the main group against 5 for face frame in this run. Both layouts came from the guillotine method described in sheet layout and saw kerf.

What drives the count

One kitchen, then two and three of the same kitchen. Face frame, main plywood group, default settings.
KitchensAll sheetsMain group sheetsMain group yieldMain group sheets per cabinet
18582%0.83
2161082%0.83
3221488%0.78
One kitchen, then two and three of the same kitchen. Face frame, main plywood group, default settings.

Sheets per cabinet falls as the job grows, because the leftover on the last sheet is shared by more parts. It also rises and falls with the mix, since a cabinet with tall sides packs differently from a drawer base. The per-cabinet figure from a small job overstates a big one.

  • Thickness groups. Each material and thickness is counted on its own, so a kitchen with 3 groups buys at least 3 sheets however small the parts are.
  • Grain. Grained parts keep their length along the 96 inch sheet length. Setting the carcass plywood to ungrained, as melamine or MDF is, lets parts turn and gives 5 sheets of the main group against 5 with grain here.
  • Kerf and trim. Both shrink the usable sheet. In this run they move the count only at the margin.
  • Cabinet mix. The 23/32 plywood area per cabinet below shows which ones take the most.
Part area in 23/32 plywood for each sample cabinet, face frame style. One sheet is 32.0 sq ft.
CabinetPart area (sq ft)Share of one sheet
Base 2424.577%
Base 3028.188%
Drawer base 1818.357%
Sink base 3626.282%
Wall 3018.758%
Wall 2415.749%
Part area in 23/32 plywood for each sample cabinet, face frame style. One sheet is 32.0 sq ft.

Sheets from part area

L-1, L-6

sheets = ceil(part area / (usable sheet area x yield))

Total the part area in one thickness, divide by the area of a sheet and by the yield you expect. In the sample the 23/32 group has 131.5 sq ft of parts and the yield is 82%, so 131.5 / (32.0 x 0.82) is 5 sheets. That only repeats the run, but it shows where the figure comes from. For a new kitchen take the yields from runs like it, not from a number someone quotes you, and treat the answer as a minimum: add a margin for defects and mistakes. Adding the cabinets to the tool is faster and exact for your list, and the plywood calculator for cabinets gives the count without a full project.

Common mistakes

  • Adding all the plywood together. A 1/4 back and a 23/32 side are different stock, so the sheets are counted per thickness.
  • Dividing area by 32.0 and rounding. That assumes 100% yield. The sample runs between 49% and 82% by group.
  • Forgetting the grain rule on grained sheets, which stops parts turning to fill a gap.
  • Costing the frame as sheets. On a face frame kitchen the frame is solid wood bought by length.
  • Taking a per-cabinet figure from one small job and applying it to a bigger one.

For the difference between the two cabinet styles see face frame vs frameless. If you are weighing a spreadsheet for this, cut list in Excel or a tool covers what a spreadsheet cannot do, which is the packing.

Questions people ask

How many sheets of plywood do I need for kitchen cabinets?

It depends on the cut list. The sample kitchen on this page, six cabinets, needs the sheet counts in the tables above, split by thickness. Your kitchen will differ, so list the cabinets and count the sheets from the parts.

Why do I need more sheets than the square footage suggests?

Parts do not pack perfectly. Yield is the part area over the sheet area used, and it is below 100 percent because of offcuts, saw kerf and grain direction. The tables above show the yield for each group.

Does a frameless kitchen use more plywood than face frame?

Not necessarily. The frameless boxes have deeper sides and bigger doors, but there is no frame to cut. In the sample run the two styles come out as the totals in the tables above.

Does grain direction change the sheet count?

It can. Grained parts must lie with their grain along the sheet length, while ungrained parts such as melamine may turn. The sample above shows the main group with and without grain.

How much extra plywood should I buy?

The count is the least the listed parts need under the layout method. How much margin to add depends on your sheet quality and how much you trust the cuts, so the product gives no fixed percentage. Check the last sheet and keep a spare for a defect.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool