Free. Type your cabinets, see the sheets.

Plywood calculator for cabinets

Add the cabinets you are building. See how many sheets of each material the whole list needs, with a cutting diagram that respects saw kerf and grain.

Your cabinets

  • Face frame base, 24 x 34 1/2 x 24

    Construction

    Type sizes as 34 1/2, 34-1/2 or 34.5. Height includes the toe kick. Depth is the box, including the face frame.

    Fronts, top to bottom (height is the frame opening; the last one takes what is left)
    Height

    The remainder

Construction

Sheets needed

3 sheets of 96 by 48, 20 parts, kerf 1/8.

  • Plywood 1/4: 1 sheet, yield 24%
  • Plywood 1/2: 1 sheet, yield 8%
  • Plywood 23/32: 1 sheet, yield 77%

Plywood 1/4: 1 sheet

Yield 24%

PLYWOOD · 1/4Back, 1/430 x 23 5/16Drawer bottom, 1/419 1/2 x 21 1/2

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Plywood 1/2: 1 sheet

Yield 8%

PLYWOOD · 1/2Drawer side 1Drawer side 2Drawer front/back 1Drawer front/back 2

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Plywood 23/32: 1 sheet

Yield 77%

PLYWOOD · 23/32Side 134 1/2 x 23 1/4Side 234 1/2 x 23 1/4Toe kick boardBottom22 9/16 x 23Shelf22 7/16 x 22 3/4Stretcher 1Stretcher 2Door21 1/2 x 22Drawer front

Guillotine layout. A better arrangement may exist. Kerf 1/8. Grain runs along the long edge of the sheet.

Open this as a project

How it is calculated

Each cabinet is turned into its parts by the cut list rules. Parts are grouped by material and actual thickness, because a 3/4 inch carcass and a 1/4 inch back never share a sheet. The parts of each group are then placed on identical stock sheets using guillotine cuts only: every cut runs edge to edge of the piece being cut, as on a table saw, track saw or panel saw.

Saw kerf is charged once between neighbours and never against the sheet edge. Each part is treated as its size plus one kerf and the sheet as its size plus one kerf. Grain runs along the sheet length, and a grained part is placed with its grain direction parallel to it. Parts in ungrained material can turn 90 degrees. A part that cannot fit the sheet in any allowed orientation is named in an error and the rest still lays out.

The packer tries four sort orders and two split rules, eight runs in all, and keeps the result with the fewest sheets. It is a heuristic: a better arrangement may exist, so the result is never called optimal. Yield is the part area divided by the usable sheet area.

The 4 by 8 foot sheet and the 1/8 inch kerf are defaults. Retail listings sell 4 ft by 8 ft sheets, and a cutlistor example uses a 3.2 mm kerf. Change either in the settings.

Need the PDF and CSV for a whole job?

Everything above is free to view. The clean export is part of a project pass.

See pricing