Cabinet making software

The cut list part, without the CNC suite

Some cabinet software designs rooms, renders them and drives a CNC. This does one job: it turns cabinet sizes and your construction settings into a cut list and lays it out on sheets.

What it does

Five cabinet types, face frame and frameless: base, wall, tall, drawer base and sink base. Every carcass panel, face frame member, door, drawer front and drawer box part, sized to your material thickness, joinery and slides. A consolidated list by material, sheet layouts with kerf and grain, a printable shop PDF and a CSV.

What it leaves out

  • No CNC output of any kind, and no 32 mm hole layouts.
  • No room layout, rendering or 3D.
  • No quoting. There is a material cost estimate from prices you enter, nothing more.
  • No blind corner or angled cabinets yet.

If you need those, you want a design package. cabora.ai and others cover that ground, and each page says where they are the better choice.

Build your cabinet now

If a cut list is the job, try one cabinet. Free, no account.

Open the cut list tool