Free. No signup. No row limits.
Face frame calculator
Enter the frame size and the number of openings. Get stile, rail and centre stile sizes and the openings your doors and drawer fronts are cut from.
From the top of the toe kick to the top of the cabinet.
Member widths and joint
2 x Frame stile1 1/2 x 30F-2
Stile = S_ff x H_ff = 1 1/2 x 30
Frame rail (top)21 x 1 1/2F-3, F-4
Top rail = L_rail x width = (W_ff - 2 x S_ff + 2t) x 1 1/2 = (24 - 3 + 0) x 1 1/2 = 21 x 1 1/2
Frame rail (middle)21 x 1 1/2F-3, F-4
Middle rail = L_rail x width = (W_ff - 2 x S_ff + 2t) x 1 1/2 = (24 - 3 + 0) x 1 1/2 = 21 x 1 1/2
Frame rail (bottom)21 x 1 1/2F-3, F-4
Bottom rail = L_rail x width = (W_ff - 2 x S_ff + 2t) x 1 1/2 = (24 - 3 + 0) x 1 1/2 = 21 x 1 1/2
Opening width: 21 (F-5)
Opening height, equal split: 12 3/4 (F-6: 25 1/2 / 2)
Tap a result to see its formula with your numbers. Verify against your own materials and hardware before cutting.
How it is calculated
A face frame is two stiles that run the full height and rails that fit between them. Stiles are S_ff x H_ff (rule F-2). Rails are the frame width less both stiles, plus tenon length at each end if the joint is a tenon: L_rail = W_ff - 2 x S_ff + 2t (F-3). Pocket screws and dowels have no tenon, so t is zero.
There is a top rail, a bottom rail, and one middle rail between each pair of stacked openings (F-4). The opening width is the frame width less both stiles (F-5), or half of what is left after a centre stile when there is one. The available height is H_ff - R_top - R_bot - (n - 1) x R_mid, split equally here (F-6). A centre stile is the height of the opening it divides plus tenon length (F-7).
The default stile and rail width of 1 1/2 inch and the 3/4 inch frame stock are assumptions to confirm for your shop. They are settings, and the defaults are labelled as such.
Note: this calculator is new and no search volume was measured for it. It uses the same rules as the full cut list.
Build your cabinet now
The calculators are small views of the cut list tool. Build the whole cabinet, free, no account.