Reference

Standard kitchen cabinet depth

Base cabinets are 24 inches deep, wall cabinets 12, tall cabinets 24 or 12. What seven sources say, where they differ, and what depth does to the cut list.

A standard base cabinet is 24 inches deep, a standard wall cabinet is 12 inches deep, and tall cabinets are 24 inches deep, or 12 inches where space is tight. These are the figures the sources we read agree on; deeper wall and tall options exist.

What the sources say

CabinetDepth statedSources
Base24 in, without the countertopBob Vila, Best Online Cabinets, Sebring Design Build, Hunker, Erin Zubot Design, Remodelista
Base with countertop25 to 26 in overallSebring Design Build, Hunker
Wall12 inBob Vila, Best Online Cabinets, Hunker, Remodelista
Wall, deeperUp to 18 in (Bob Vila); 12 to 24 in (Sebring); 12 to 15 in (Erin Zubot Design); up to 24 in for appliances (Hunker)Differ by source
Tall24 inBest Online Cabinets, Bob Vila, Hunker
Tall, shallow12 in for tighter spacesBob Vila, Hunker

Bob Vila says base cabinets come in one standard depth, 24 inches. The overall depth with a countertop is the cabinet plus the overhang. Bob Vila gives an overhang of up to 2 inches and Best Online Cabinets one to two inches, which matches the 25 to 26 inch totals above.

None of these is a published trade standard. The kitchen planning guidelines of the National Kitchen & Bath Association returned an access error when we tried to read them, so no figure here is attributed to that body.

What depth does to the cut list

The side panels are as deep as the cabinet box, less anything the face frame or an applied back takes. With a face frame and the default settings, the tool takes the frame thickness off the side depth, so a 24 inch cabinet has sides 23 1/4 inches deep. Without a frame the sides are 24 inches deep.

A frameless 24 x 34 1/2 x 24 base cabinet. Compare the side depth with the face frame version in the guide on face frame versus frameless.
PartQtyLengthWidthRule
Side23024C-5, C-6
Bottom122 9/1623 3/4C-8, C-9, C-10
Front stretcher122 9/164C-11
Rear stretcher122 9/164C-11
Back, 1/4123 5/1630C-12
Shelf122 7/1623 1/2C-14
Toe kick board1244 1/2C-16
Drawer front (drawer 1)123 7/86D-10
Drawer side (drawer 1)2224 23/32B-4, B-5, B-7
Drawer front/back (drawer 1)220 9/164 23/32B-3, B-7
Drawer bottom, 1/4 (drawer 1)121 1/1621 1/2B-8
Door (door 2)123 7/823 3/4D-10
A frameless 24 x 34 1/2 x 24 base cabinet. Compare the side depth with the face frame version in the guide on face frame versus frameless.

The horizontals are shallower than the sides by the back rabbet, and shelves are set back from the front. Rules C-5, C-9 and C-14 give each one. See the face frame versus frameless guide for the two lists side by side.

Depth limits the drawer slide

A drawer slide must fit inside the clear depth less rear clearance. At 24 inches deep, a 24 inch slide does not fit, and the tool picks the longest nominal slide that does. At 12 inches deep a drawer is usually not possible with the default clearance, and the tool says so with the depth it needs. Drawer boxes are explained in the drawer box guide.

Wall cabinets and the counter

A 12 inch wall cabinet over a 24 inch base leaves 12 inches of countertop to work on before the cabinet front. If you want more clearance, a shallower wall cabinet or a deeper counter changes it, and the sources give options for both. The heights, and the gap between counter and wall cabinet, are on the wall and tall cabinet sizes page.

See also standard base cabinet height and the full standard kitchen cabinet dimensions table.

Questions people ask

What is the standard depth of a kitchen base cabinet?

Every source we read that states a base cabinet depth gives 24 inches, measured without the countertop and the doors. With a countertop that overhangs the front, two sources give 25 to 26 inches overall.

What is the standard depth of a wall cabinet?

12 inches is the figure four of the sources give. Some sources add deeper options: up to 18 inches, 12 to 15 inches, or up to 24 inches for appliance cabinets. Check the maker before you assume.

Is cabinet depth measured with or without the doors?

The sources describe the depth of the cabinet box. In the tool, depth is the box, and with a face frame you choose whether the depth includes the frame. That choice changes the side panel depth by the frame thickness.

How does depth change the cut list?

Side panels, the bottom, the top or stretchers, shelves and the drawer slide length all follow from depth. A drawer slide has to fit inside the depth less rear clearance, so a shallow cabinet can force a shorter slide or rule out a drawer.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool