Reference

Standard base cabinet height

Standard kitchen base cabinet height is 34 1/2 inches without a countertop, 35 to 36 with one. What sources say, where they differ, and the cut list.

The standard base cabinet height in the sources we read is 34 1/2 inches to the top of the cabinet box, which becomes 35 to 36 inches once a countertop is on it. One page we read gives a different figure, so treat 34 1/2 as the common one, not the only one.

What the sources say

We read seven pages on 2026-11-19, six retail or editorial pages and one forum thread. The table shows what each states about base cabinet height. Where a page gives a different number, the table says so.

SourceCabinet heightWith countertop
Bob Vila34 1/2 inFinished counter height between 35 and 36 in
Best Online Cabinets34 1/2 in36 in
Sebring Design Build34.5 inCounter typically 35 to 36 in from the floor
Hunker34.5 in35 to 36 in
Remodelista34.5 in (FAQ)36 in (text)
Erin Zubot Design30 in with a 4 in toe kickCountertop adds about 1 1/2 to 2 in; total 36 in
WoodWeb forum thread (low authority)One contributor says 34 1/2 inAnother says net 36 in with the counter

The agreement is on 34 1/2 inches. The 36 inch finished height is common to the sources that state a total. The 30 inch figure on one page does not match the others, and we do not call it standard.

None of these pages is a standard published by a trade body. We tried the National Kitchen & Bath Association's kitchen planning guidelines and the page returned an access error, so this page does not attribute any figure to that body.

The height in a cut list

The height you enter is the overall height including the toe kick. In the tool that means the notched sides of a face frame base are the full height: 34 1/2 inches for a 34 1/2 inch cabinet. The box height above the kick, which sets the back and the face frame stiles, is the total less the toe kick height.

Cut list for a 24 x 34 1/2 x 24 face frame base cabinet. Every size comes from the tool's rules, with the rule ID in the last column.
PartQtyLengthWidthRule
Side234 1/223 1/4C-5, C-6
Bottom122 9/1623C-8, C-9, C-10
Stretcher222 9/164C-11
Back, 1/4123 5/1630C-12
Shelf122 7/1622 3/4C-14
Toe kick board1244 1/2C-16
Frame stile21 1/230F-2
Frame rail (top)1211 1/2F-3, F-4
Frame rail (middle)1211 1/2F-3, F-4
Frame rail (bottom)1211 1/2F-3, F-4
Drawer front (drawer 1)1226D-4
Drawer side (drawer 1)2224 1/4B-4, B-5, B-7
Drawer front/back (drawer 1)2194 1/4B-3, B-7
Drawer bottom, 1/4 (drawer 1)119 1/221 1/2B-8
Door (door 2)12221 1/2D-1
Cut list for a 24 x 34 1/2 x 24 face frame base cabinet. Every size comes from the tool's rules, with the rule ID in the last column.

The back is 30 inches tall, which is the cabinet height less the 4 1/2 inch toe kick the tool uses by default (rule C-4). The face frame stiles are the same height (rule F-2).

Side view with the dimensions the tool uses as defaults: base 34 1/2, depth 24, toe kick 4 1/2 by 3. These are the tool's starting values, which you can change, not a claim of a standard.

Toe kick height varies too

The toe kick takes part of the total, so a different kick changes the box above it. The sources give 4 1/2 inches (Best Online Cabinets, Remodelista), 4 inches (Erin Zubot Design) and 3 1/2 inches with a 3 inch depth, in a range of 3 to 4 1/2 inches (Sebring Design Build). The tool defaults to 4 1/2 by 3. See the toe kick styles guide for how notched sides, a separate base and legs change the parts.

Counter height versus cabinet height

Counter height is the finished surface. Bob Vila gives a finished counter height between 35 and 36 inches, Sebring Design Build 35 to 36 inches from the floor, and Erin Zubot Design and Remodelista 36 inches. Countertop thickness is not stated in the same way across the pages, so if the finished height matters to you, measure the slab you are buying and subtract it from your target.

Build to your own height

A shop can build any height. If you work to a 36 inch finished counter with a 1 1/2 inch top, the cabinet is 34 1/2 inches. If your countertop is thicker or thinner, or you build for someone who needs a lower or higher work surface, enter that height. The cut list follows, and the setting that matters most is the real thickness of your sheet material, not the nominal one.

Related: standard kitchen cabinet depth, all standard kitchen cabinet dimensions and the base cabinet box guide. For the whole kitchen, see the kitchen cabinet cut list.

Questions people ask

How tall is a standard kitchen base cabinet?

Most of the sources we read give 34 1/2 inches for the cabinet without a countertop. With a countertop on top, the finished height is about 36 inches, and the sources that give a range say 35 to 36 inches.

Does the 34 1/2 inches include the toe kick?

Yes. The height is measured from the floor to the top of the cabinet, so the toe kick is inside it. In the cut list the sides are the full height for a notched kick, and the kick board and its height come out of the same total.

Why do some sources say 30 inches?

One page we read describes a 30 inch base cabinet with a 4 inch toe kick and says the countertop adds about 1 1/2 to 2 inches. The other pages describe a 34 1/2 inch cabinet. If you build to 30 inches, enter that height in the tool and every part follows.

Can I change the base cabinet height in a cut list?

Yes. Height is an input. The sides, back, face frame stiles and door heights all follow from it, and the toe kick height is its own setting.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool