Reference

Standard wall and tall cabinet sizes

Wall cabinet heights, depth, the gap above the counter, and tall cabinet heights of 84, 90 and 96 inches. Sources compared, with the cut list for each.

Wall cabinets are commonly 12 inches deep and 30 or 36 inches tall, hung about 18 inches above the countertop. Tall cabinets are 84, 90 or 96 inches high and usually 24 inches deep. Sources differ on the full list of heights, so this page shows each one.

Wall cabinet heights

SourceHeights stated
Hunker12, 15, 18, 24, 30, 36 and 42 in
Sebring Design Build12, 15, 18, 30, 36, 42 and 48 in
Bob Vila12, 18, 30 and 36 in
Best Online Cabinets30, 36 and 42 in
Erin Zubot Design30 to 40 in and beyond

The lists overlap on 30 and 36 inches. Shorter heights (12 to 24 inches) sit over a range hood, a refrigerator or a window, and taller ones (42 and up) reach toward a high ceiling. Which of these your supplier sells is a question for that supplier. If you build your own, any height is available, and you enter it.

The gap above the counter

SourceCounter to bottom of wall cabinet
Bob VilaAbout 18 in
Sebring Design Build18 in
Remodelista18 in is the standard distance; some installs go to about 24 in
Best Online CabinetsTypically 15 to 18 in
Erin Zubot Design18 to 20 in
A base cabinet, a countertop and a wall cabinet at the product's default sizes, with the 18 inch gap the sources most often give. The sizes shown are the tool's starting values.

A wall cabinet in the cut list

A wall cabinet has no toe kick, so every part uses the full height. The top is a full panel rather than two stretchers, and there are two adjustable shelves by default.

A 30 x 30 x 12 face frame wall cabinet with a pair of doors. Hinge counts follow from the door heights.
PartQtyLengthWidthRule
Side23011 1/4C-5, C-6
Bottom128 9/1611C-8, C-9, C-10
Top128 9/1611C-11
Back, 1/4129 5/1630C-12
Shelf228 7/1610 3/4C-14
Frame stile21 1/230F-2
Frame rail (top)1271 1/2F-3, F-4
Frame rail (bottom)1271 1/2F-3, F-4
Door (door 1)213 15/1628D-2
A 30 x 30 x 12 face frame wall cabinet with a pair of doors. Hinge counts follow from the door heights.

A 30 inch wall cabinet with a pair of doors has 4 hinges by the tool's hinge rule. That rule is an assumption to confirm against your hinge maker's guidance.

Tall cabinets

A 24 x 84 x 24 frameless tall cabinet with two door sections, two adjustable shelves and one fixed shelf.
PartQtyLengthWidthRule
Side279 1/224C-5, C-6
Bottom122 9/1623 3/4C-8, C-9, C-10
Top122 9/1623 3/4C-11
Back, 1/4123 5/1679 1/2C-12
Shelf222 7/1623 1/2C-14
Fixed shelf122 9/1623 3/4C-15
Toe kick board1244 1/2C-16
Door (door 1)123 7/839 5/8D-10
Door (door 2)123 7/839 5/8D-10
A 24 x 84 x 24 frameless tall cabinet with two door sections, two adjustable shelves and one fixed shelf.

A tall cabinet is built like a base cabinet with a toe kick and a full top, plus a fixed shelf, and its doors are a vertical stack of sections. At 84 inches it needs 3 sheets of the main plywood by itself in the layout, so tall cabinets drive the sheet count of a kitchen.

More: standard cabinet depth, base cabinet height and the overview of standard kitchen cabinet dimensions.

Questions people ask

How high do you hang wall cabinets above the counter?

Most sources we read say about 18 inches above the countertop. One says 15 to 18 inches, one 18 to 20, and one adds that some installations go to about 24 inches. We could not read the trade guideline pages, so no figure here is a published code or guideline.

What are standard wall cabinet heights?

The lists differ by source: 12, 15, 18, 24, 30, 36 and 42 inches (Hunker); 12, 15, 18, 30, 36, 42 and 48 (Sebring); 12, 18, 30 and 36 (Bob Vila); 30, 36 and 42 (Best Online Cabinets). The 30 and 36 inch heights appear on every list of specific heights.

What are standard tall cabinet heights?

84, 90 and 96 inches in three of the sources, and 7 or 8 feet (84 to 96 inches) in a fourth. Depth is usually 24 inches, or 12 inches where space is tight.

Do wall cabinets have a toe kick?

No. A wall cabinet has no toe kick, so the box height is the full cabinet height and the sides, back and doors all use it.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool