Drawer base cabinet dimensions and cut list
Drawer base cabinet cut list with front heights for 2, 3 and 4 drawers, box sizes and slides at widths from 12 to 36 inches, face frame and frameless.
A three-drawer base cabinet at 24 wide, 34 1/2 high and 24 deep has three equal fronts, each 9 high as a face frame cabinet and 9 7/8 high frameless, on 22 slides. A four-drawer stack of the same cabinet drops the fronts to 6 5/8.
Our research found no fetched source that states drawer base widths. The widths on this page, 12 to 36 inches in 3 inch steps, are the tool's example widths, not a standard. Height and depth are the base cabinet figures on the dimensions reference.
Drawer base widths and what changes
Width changes the drawer front length and the box width. It does not change the slide length or the box depth, which follow the cabinet depth. The slide here is 22 at every width, and a drawer box is 22 deep.
| Width | FF front length | FF box width | FF bottom length | FL front length | FL box width | FF parts | FL parts |
|---|---|---|---|---|---|---|---|
| 12 | 10 | 8 | 7 1/2 | 11 7/8 | 9 9/16 | 31 | 25 |
| 15 | 13 | 11 | 10 1/2 | 14 7/8 | 12 9/16 | 31 | 25 |
| 18 | 16 | 14 | 13 1/2 | 17 7/8 | 15 9/16 | 31 | 25 |
| 21 | 19 | 17 | 16 1/2 | 20 7/8 | 18 9/16 | 31 | 25 |
| 24 | 22 | 20 | 19 1/2 | 23 7/8 | 21 9/16 | 31 | 25 |
| 27 | 25 | 23 | 22 1/2 | 26 7/8 | 24 9/16 | 31 | 25 |
| 30 | 28 | 26 | 25 1/2 | 29 7/8 | 27 9/16 | 31 | 25 |
| 33 | 31 | 29 | 28 1/2 | 32 7/8 | 30 9/16 | 31 | 25 |
| 36 | 34 | 32 | 31 1/2 | 35 7/8 | 33 9/16 | 31 | 25 |
The parts counts include the drawer boxes. The drawer count stays at three through every width because the stack, not the width, sets it. For the face frame and frameless difference in the box, see face frame against frameless.
Two, three and four drawers
The stack divides the opening equally, so more drawers means shorter fronts and shallower boxes. A deep top drawer for pots is a custom split: set front heights in the tool.
| Drawers | Front height | Box height (first) | Box height (last) | Slide pairs |
|---|---|---|---|---|
| 2 | 13 3/4 | 12 | 12 | 2 |
| 3 | 9 | 7 1/4 | 7 1/4 | 3 |
| 4 | 6 5/8 | 4 7/8 | 4 7/8 | 4 |
| Drawers | Front height | Box height (first) | Box height (last) | Slide pairs |
|---|---|---|---|---|
| 2 | 14 7/8 | 13 19/32 | 13 15/32 | 2 |
| 3 | 9 7/8 | 8 19/32 | 8 15/32 | 3 |
| 4 | 7 3/8 | 6 3/32 | 6 3/4 | 4 |
Frameless boxes differ from one drawer to the next because the front heights step by the reveal rules, so the first and last box heights are not always equal. Box size rules, slide clearances and undermount alternatives are in drawer box sizes for side-mount and undermount slides, and the drawer box calculator sizes one box.
Cut list for a 24 inch three-drawer base, face frame
| Part | Qty | Length | Width | Rule |
|---|---|---|---|---|
| Side | 2 | 34 1/2 | 23 1/4 | C-5, C-6 |
| Bottom | 1 | 22 9/16 | 23 | C-8, C-9, C-10 |
| Stretcher | 2 | 22 9/16 | 4 | C-11 |
| Back, 1/4 | 1 | 23 5/16 | 30 | C-12 |
| Toe kick board | 1 | 24 | 4 1/2 | C-16 |
| Frame stile | 2 | 1 1/2 | 30 | F-2 |
| Frame rail (top) | 1 | 21 | 1 1/2 | F-3, F-4 |
| Frame rail (middle) | 2 | 21 | 1 1/2 | F-3, F-4 |
| Frame rail (bottom) | 1 | 21 | 1 1/2 | F-3, F-4 |
| Drawer front (drawer 1) | 1 | 22 | 9 | D-4 |
| Drawer side (drawer 1) | 2 | 22 | 7 1/4 | B-4, B-5, B-7 |
| Drawer front/back (drawer 1) | 2 | 19 | 7 1/4 | B-3, B-7 |
| Drawer bottom, 1/4 (drawer 1) | 1 | 19 1/2 | 21 1/2 | B-8 |
| Drawer front (drawer 2) | 1 | 22 | 9 | D-4 |
| Drawer side (drawer 2) | 2 | 22 | 7 1/4 | B-4, B-5, B-7 |
| Drawer front/back (drawer 2) | 2 | 19 | 7 1/4 | B-3, B-7 |
| Drawer bottom, 1/4 (drawer 2) | 1 | 19 1/2 | 21 1/2 | B-8 |
| Drawer front (drawer 3) | 1 | 22 | 9 | D-4 |
| Drawer side (drawer 3) | 2 | 22 | 7 1/4 | B-4, B-5, B-7 |
| Drawer front/back (drawer 3) | 2 | 19 | 7 1/4 | B-3, B-7 |
| Drawer bottom, 1/4 (drawer 3) | 1 | 19 1/2 | 21 1/2 | B-8 |
There is no door, so no hinge. The cabinet has 3 pulls, one per front. A drawer base also loses the shelf: the engine gives it no adjustable shelf, so the parts are the carcass, the frame, the toe kick and the boxes.
Common mistakes
- Making every drawer the same height when the top one must hold pots. Set the stack yourself.
- Choosing a slide as long as the cabinet is deep. A slide needs rear clearance; the tool chose 22 for this depth.
- Forgetting the box is narrower than the opening by the side space for the slide. Side-mount slides need about 1/2 inch each side.
- Treating the example widths as a standard. Check your own supplier or build to your space.
Questions people ask
What are the dimensions of a 3 drawer base cabinet?
At the tool defaults a 24 inch wide three-drawer base is 34 1/2 inches high and 24 inches deep, with three equal fronts. Width is yours to choose: we found no source stating standard drawer base widths, so the widths shown are examples.
How tall is each drawer front?
In an equal stack the opening is divided by the number of drawers. In the 24 inch face frame example each of three fronts is 9 inches high, and four fronts are shorter. The tables above print the engine figures for two, three and four.
What size are the drawer boxes?
The box is the slide length deep, 22 inches in the example, and its width is the opening less the side space for the slides. Height comes from the front height less the top and bottom clearances.
Is a 4 drawer base cabinet possible?
Yes. Each drawer needs a box height of at least 2 inches by the tool setting, and a four-drawer 24 inch stack passes it. Shorter fronts mean shallower boxes, so check what you want to store.
Do face frame and frameless drawer bases differ?
Yes. Face frame fronts sit on a frame and the drawer front is shorter than the frameless front, which covers the carcass edge. The width tables above show both side by side.
Sources
- Popular Woodworking, Sizing parts for drawers on Blum TANDEM slides. Source S1 of the product rules Read .
- Accuride Europe, Understanding side space. Source S2 of the product rules Read .