Cut list guide

Cabinet cut list template

Download a free cabinet cut list template as a CSV for Excel or Google Sheets. See every column, a worked 24 inch base cabinet and the formula for each part.

Yes. Download the free cut list template (CSV). It opens in Excel and Google Sheets, needs no email and carries the same 15 columns as the tool's own CSV export, with one worked line set for a 24 inch face frame base cabinet.

A blank sheet gives you the columns. It does not give you the sizes, and the sizes change whenever a setting changes. The tool fills the same columns from rules, and the table below gives the Excel formula for each part so you can use the sheet on its own.

The template and what is in it

The file has a header row and the part lines the engine produces for a 24 wide, 34 1/2 high, 24 deep face frame base cabinet at the product defaults, with identical parts merged into one line. Delete the example lines and type over them, or keep them as a pattern. Sizes in the example are examples, not a standard: they come from the default settings, such as 23/32 plywood and a 1/8 kerf.

The worked example in the template: a 24 inch face frame base cabinet, every part line, with the rule that sized it. Sizes in inches.
PartQtyLengthWidthRule
Side234 1/223 1/4C-5, C-6
Bottom122 9/1623C-8, C-9, C-10
Stretcher222 9/164C-11
Back, 1/4123 5/1630C-12
Shelf122 7/1622 3/4C-14
Toe kick board1244 1/2C-16
Frame stile21 1/230F-2
Frame rail (top)1211 1/2F-3, F-4
Frame rail (middle)1211 1/2F-3, F-4
Frame rail (bottom)1211 1/2F-3, F-4
Drawer front (drawer 1)1226D-4
Drawer side (drawer 1)2224 1/4B-4, B-5, B-7
Drawer front/back (drawer 1)2194 1/4B-3, B-7
Drawer bottom, 1/4 (drawer 1)119 1/221 1/2B-8
Door (door 2)12221 1/2D-1
The worked example in the template: a 24 inch face frame base cabinet, every part line, with the rule that sized it. Sizes in inches.
The cabinet the example lines describe, drawn by the same engine that wrote the file.

What each column means

The template columns, in file order, with what goes in each and the value on the first example line.
ColumnWhat it holdsExample
materialSheet or stock the part is cut from, such as Plywood or Solid wood.Plywood
thicknessReal thickness of that material as text.23/32
partPart name. Identical parts are merged into one line.Side
cabinet_idsWhich cabinet the part belongs to. A quantity above one reads "Name x2".Base 24
qtyHow many of this part you cut.2
lengthCut length in the display format (fractions in inches).34 1/2
widthCut width in the display format.23 1/4
length_exactCut length as a decimal. Use this column for any Excel formula.34.5
width_exactCut width as a decimal.23.25
grainWhich dimension the grain runs along: length or width.length
band_L1Edge banding on the first long edge: 1 banded, 0 not.0
band_L2Edge banding on the second long edge.0
band_W1Edge banding on the first short edge.0
band_W2Edge banding on the second short edge.0
rule_idThe rule that sized the part, so you can look up its formula.C-5 C-6
The template columns, in file order, with what goes in each and the value on the first example line.

How to fill it in Excel

  1. Put your settings in named cells: W, H and D for the cabinet, T for the real panel thickness (measure your sheet), d_rab for the back rabbet depth, kick_h for the kick height and S_ff for the face frame stile width.
  2. Type the formula for each part into its length_exact or width_exact cell, using the table below.
  3. Copy the decimals into the length and width columns, or leave them blank if you only need the decimals.
  4. Set qty and the band columns. Group lines by material and thickness before you count sheets, because a 1/4 inch back never shares a sheet with a 23/32 inch side.
  5. Sort by material and print the sheet for the shop.
Excel formulas for the parts of a face frame base cabinet with a notched toe kick, with the value they give for the 24 inch example. Each one equals what the engine printed.
RuleValueFormulaExample result
C-5 C-6Side length=H34 1/2
C-8 C-9 C-10Bottom length=W-2*T22 9/16
C-11Stretcher length=W-2*T22 9/16
C-12Back length=W-2*T+2*d_rab23 5/16
C-12Back width=H-kick_h30
C-16Kick board length=W24
F-2Frame stile width=H-kick_h30
F-3 F-4Frame rail length=W-2*S_ff21
Excel formulas for the parts of a face frame base cabinet with a notched toe kick, with the value they give for the 24 inch example. Each one equals what the engine printed.
C-8, C-9

bottom length = W - 2 x T; with butt joints the bottom sits between the two sides

Those formulas cover the carcass for one construction. Door and drawer front sizes depend on overlay, reveal and gap settings, so they are rules D-1 to D-14 in the tool and are not worth rebuilding by hand. See the cabinet door size calculator and the drawer box calculator for those, and cut list in Excel versus a tool for where a spreadsheet stops paying.

Common mistakes

  • Using 3/4 inch for panel thickness. Most 3/4 inch plywood measures 23/32. Every width and length that depends on T is off by the difference, twice.
  • Copying a face frame formula into a frameless cabinet. The side depth, the stretcher set and the frame parts change. See face frame against frameless.
  • Leaving the back out of the sheet count. It is a separate thickness and its own group.
  • Listing parts without banded edges, then buying banding by guess.

Where the template stops

The template is a sheet. It does not know your construction. Change the joint, the back method, the slide or the door type, and every formula needs rewriting. The tool does that for you: pick a type, style and size, and it prints the same columns, the sheet layout and the hardware. One cabinet is free on screen; for what exports cost, see pricing.

Questions people ask

Is there a free cabinet cut list template for Excel?

Yes. The CSV on this page is free, needs no email and opens in Excel and Google Sheets. It has the same columns as the tool CSV export and an example 24 inch base cabinet to copy from.

What columns does a cabinet cut list need?

At minimum: material, thickness, part name, quantity, length, width and grain. Add the four edge banding columns and the cabinet name once you build more than one cabinet, so you can group parts and order banding.

Can I get a cut list as a PDF?

The template is a CSV, so print it from Excel or Sheets to PDF. The tool also prints a cut list with a sheet layout; see the pricing page for which exports each plan includes.

Why does Excel change my fractions to dates?

A General cell treats 1/4 as a date. Format the cells as Text before pasting, or use the length_exact and width_exact decimal columns, which never need fractions typed in.

Why use a calculator instead of a blank template?

The sizes depend on construction settings such as joint, back method and overlay. A sheet needs every formula rewritten when one of them changes. A calculator recomputes the whole list from the new setting.

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool