Cut list for this size

Garage and shop cabinet plans

Garage cabinet cut list for a base, wall and tall cabinet at example sizes, with parts, sheet count and layout, built from sourced garage cabinet depths.

A garage set can be built from the same three boxes as a kitchen: a base, a wall cabinet and a tall cabinet. The two garage guides we fetched give base boxes about 24 inches deep (18 to 24 on one), wall boxes 12 to 18 deep, and tall boxes 24 deep (18 to 24 on one).

The example set below is a 36 inch base, a 36 inch wall and a 24 inch tall, all frameless with slab fronts. Together the plan totals 8 sheets across the plywood thicknesses, and the sizes are examples because both sources are vendor pages and say makers differ.

Base, wall and tall at example garage sizes

Three frameless garage cabinets at example sizes. Side is length x width. Fronts are quantity x length x width. Inches.
CabinetW x H x DPartsSideFrontsHinges
Base36 x 34 1/2 x 241630 x 241 x 35 7/8 x 6; 2 x 17 7/8 x 23 3/44
Wall36 x 30 x 12930 x 122 x 17 7/8 x 29 7/84
Tall24 x 84 x 241179 1/2 x 241 x 23 7/8 x 39 5/8; 1 x 23 7/8 x 39 5/84
Three frameless garage cabinets at example sizes. Side is length x width. Fronts are quantity x length x width. Inches.

Sizes come from the lists in the VAULT guide: base height 34 1/2, wall depth 12, tall height 84 and widths of 24, 36 and 48 inches. A steel and slatwall vendor gives wider ranges: base 18 to 24 inches deep, wall 12 to 18, and full-height sets 72 to 77 inches. Change any of those in the tool and the lists follow.

Full cut list for the garage base cabinet, 36 inch frameless. Inches.
PartQtyLengthWidthRule
Side23024C-5, C-6
Bottom134 9/1623 3/4C-8, C-9, C-10
Front stretcher134 9/164C-11
Rear stretcher134 9/164C-11
Back, 1/4135 5/1630C-12
Shelf134 7/1623 1/2C-14
Toe kick board1364 1/2C-16
Drawer front (drawer 1)135 7/86D-10
Drawer side (drawer 1)2224 23/32B-4, B-5, B-7
Drawer front/back (drawer 1)232 9/164 23/32B-3, B-7
Drawer bottom, 1/4 (drawer 1)133 1/1621 1/2B-8
Door (door 2)217 7/823 3/4D-11
Full cut list for the garage base cabinet, 36 inch frameless. Inches.
The garage base, with the tool's default front arrangement.
The tall cabinet, drawn from the same sizes as the set table.

The set on plywood

All three boxes are in one project, so the layout shares sheets. The main Plywood group is 5 sheets with 71% yield, and the whole project totals 8 sheets including backs and other thicknesses. The tall sides are the long parts: they set how the rest packs.

PLYWOODSide 179 1/2 x 24Door 139 5/8 x 23 7/8Door 239 5/8 x 23 7/8
First sheet of the main plywood group for the garage set: one base, one wall and one tall. Grain along the long edge.

What the settings let you change

The engine does not rate a load. What it does is size parts from the panel thickness T and the back thickness T_back. The default is 23/32 for the carcass and 1/4 for the back. If you build with a thicker back for stiffness, change T_back and every part that depends on it follows.

The garage base with the back at its default and with a thicker back. Only the back thickness changes in this comparison. Inches.
SettingBack thicknessBack lengthBack widthProject sheets
Default T_back1/435 5/16308
T_back at 1/2 inch1/235 5/16308
The garage base with the back at its default and with a thicker back. Only the back thickness changes in this comparison. Inches.

Whether a thicker back or panel is right for what you will hang or load is your call. We did not find a source stating a garage load rating, so none is claimed here.

Built-ins from the same boxes

A built-in run is the same boxes pushed together. The parts that fill the gap to the wall, scribes and fillers, are not part of the engine boxes: add them as custom parts in the tool. See face frame against frameless for the carcass difference and the plywood calculator for cabinets to count sheets for a longer run.

Common mistakes

  • Using the kitchen wall depth of 12 inches over a workbench without checking head room. One guide gives 12 to 18 for garage wall cabinets; choose by what you store.
  • Sizing the back to the default when you plan to hang heavy tools on the wall cabinet. Set T_back first.
  • Assuming the example sizes are a standard. They are examples taken from vendor pages.

Questions people ask

What size are garage cabinets?

The VAULT guide gives 24 inch deep base and tall boxes, 12 inch deep wall boxes and widths of 24, 36 and 48 inches. A second vendor gives wider ranges, so these are examples and not a fixed standard. Check against the space you have.

Can I use kitchen cabinets in a garage?

The boxes are built the same way and the same cut lists apply. We found no source that rates a board or finish for garage damp or heat, so we make no claim; ask your sheet supplier about the material for your climate.

Which cabinet type suits a garage?

It depends on what you store. A base gives a bench and drawers, a wall cabinet keeps tools off the floor and a tall cabinet holds long items. This page sizes all three so you can pick or combine them.

How do I build built-in cabinets from these boxes?

Build the boxes as listed, set them side by side and add scribe and filler parts at the wall. Those fillers are custom parts in the tool, because they depend on how straight your wall is.

Can I make the back thicker?

Yes. Change the back thickness setting T_back and the tool recalculates the back and the sheet count. The tool does not rate a load, so choose by what you will hang on it.

Sources

  1. VAULT Custom Garage Design, Design a Layout Using Standard Cabinet Dimensions. base, wall and tall depths, heights, widths Read .
  2. Steel Slat, Standard Garage Cabinet Dimensions and Depths. depth ranges for base, wall and tall; full-height 72 to 77 in Read .

Run your own cabinet

The numbers in this article come from the same engine as the tool. Free for one cabinet, no account.

Open the cut list tool